| Supply | |
|---|---|
| Voltage | 24 Vdc nom (18 to 30 Vdc), reverse polarity protected |
| Current Consumption | 90 mA @ 24 Vdc with 20 mA out, typical. |
| Power Dissipation | 1.35 W @ 24 Vdc with 20 mA out, typical. |
| Input | |
| Type | 4 to 20 mA (separately powered input, voltage drop ≤ 0.5 V) or 4 to 20 mA (2 wires Tx current limited ≈ 25 mA), reading range 0 to 24 mA. |
| Transmitter Line Voltage | 15.0 V typical, 14.5 V minimum, @ 20 mA. |
| Output | |
| Type | 4 to 20 mA on max. 550 Ω load in source mode (typical 12 V compliance); V min 8 V @ 0 Ω load, V max 30 V in sink mode (current limited ≈ 25 mA) or 1 to 5 V on internal 250 Ω shunt. Output current duplication available (D5014D). |
| Response Time | 5 ms (0 to 100 % step change). |
| Performance | |
| Ref. Conditions | 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature. |
| Calibration Accuracy | ≤ ± 0.1 % FSR. |
| Linearity Accuracy | ≤ ± 0.05 % FSR. |
| Temp. Influence | ≤ ± 0.01 % FSR on zero/span for a 1 °C change. |
| Isolation | |
| Test Voltage | I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V. |
| Environmental Conditions | |
| Operating Temperature | –40 to +70 °C. |
| Storage Temperature | –45 to +80 °C. |
| Safety Description | |
| Equipment | Associated apparatus and non‑sparking electrical equipment. |
| Safety Parameters | Uo = 25.9 V, Io = 92 mA, Po = 594 mW at terminals 7‑8, 9‑10; Uo = 1.1 V, Io = 56 mA, Po = 16 mW at terminals 8‑11, 10‑12; Ui = 30 V, Ii = 128 mA, Ci = 0 nF, Li = 0 nH at terminals 8‑11, 10‑12; Um = 250 Vrms or Vdc, –40 °C ≤ Ta ≤ 70 °C. |
| Mounting | |
| Type | DIN‑Rail 35 mm, with or without Power Bus or on custom Term. Board. |
| Weight | |
| Weight | About 155 g |
| Connection | |
| Connection | By polarized plug‑in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG). |
| Dimensions | |
| Dimensions | Width 12.5 mm, Depth 123 mm, Height 120 mm. |
D5014D SIL3 2/4-Wire HART® Transmitter Power Supply
D5014D Özellikler
- 🔹 SIL 3 / SC 3
- 🔹 Input From Zone 0 / Div. 1
- 🔹 Installation In Zone 2 / Div. 2
- 🔹 2 Fully Independent Channels
- 🔹 4–20 mA Active‑Passive Input, Source‑Sink Output
- 🔹 Output Current Duplication Available
- 🔹 HART® Compatible
🟢 Active
DISCOVER D5000 – PRODUCT POLICY Channels: 2/4
DISCOVER D5000 – PRODUCT POLICY Channels: 2/4
Orijinal fiyat: ₺22.199,00.₺17.233,00Şu andaki fiyat: ₺17.233,00.
ABOUT THIS PRODUCT
| GMI Features | HART© Compatible |
|---|---|
| GMI Input Type | 2 Wire Passive |
| GMI Input Range | 4-20 mA |
| GMI Operating Temperature | -40…+70 °C |
| GMI Output Range | 4-20 mA |
| GMI Output Type | Sink Mode, Source Mode |
| GMI Series | D5000 |
| GMI SIL | SIL 3 |
| GMI Supply Voltage | 24 Vdc |
| GMI Status | Active |
Endüstriyel Çözümleri
-
Relay In
D5093S-TB SIL3 Relay In Safety Relay
Orijinal fiyat: ₺7.100,00.₺6.849,00Şu andaki fiyat: ₺6.849,00. -
Relay In
D5093S SIL3 Relay In Safety Relay
Orijinal fiyat: ₺7.340,00.₺6.999,00Şu andaki fiyat: ₺6.999,00. -
Relay In
D5093D-TB SIL3 Relay In Safety Relay
Orijinal fiyat: ₺11.280,00.₺10.900,00Şu andaki fiyat: ₺10.900,00. -
Relay In
D5093D SIL3 Relay In Safety Relay
Orijinal fiyat: ₺12.599,00.₺11.499,00Şu andaki fiyat: ₺11.499,00. -
Quick ViewDevamını okuAC AccelerometersHS-150IT – Top Exit – Integral Braided Accelerometer
-
Quick ViewDevamını okuAC AccelerometersHS-150 – Top Exit – 2 Pin MS Accelerometer
-
Drives
DRIVE EU CFW11 0370 T4 SZ
Orijinal fiyat: ₺792.500,00.₺317.400,00Şu andaki fiyat: ₺317.400,00. -
Drives
DRIVE EU CFW11 0312 T4 SZ
Orijinal fiyat: ₺725.400,00.₺290.400,00Şu andaki fiyat: ₺290.400,00.
