GMI D5011D - SIL3 2‑Wire HART® Power Supply

Supply
Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected
Current Consumption	90 mA @ 24 Vdc with 20 mA out, typical.
Power Dissipation	1.35 W @ 24 Vdc with 20 mA out, typical.
Input
Type	4 to 20 mA (2 wires Tx current limited ≈ 25 mA), reading range 0 to 24 mA.
Transmitter line voltage	15.0 V typical, 14.5 V minimum, @ 20 mA.
Output
Type	4 to 20 mA, on max. 550 Ω load in source mode (typical 12 V compliance).
Response time	5 ms (0 to 100 % step change).
Performance
Ref. Conditions	24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.
Calibration accuracy	≤ ± 0.1 % FSR.
Linearity accuracy	≤ ± 0.05 % FSR.
Temp. influence	≤ ± 0.01 % FSR on zero/span for a 1 °C change.
Isolation
Test Voltage	I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V.
Environmental Conditions
Operating temperature	–40 to +70 °C.
Storage temperature	–45 to +80 °C.
Safety Description
Equipment	Associated apparatus and non‑sparking electrical equipment.
Safety parameters	Uo = 25.9 V, Io = 92 mA, Po = 594 mW at terminals 7‑8, 9‑10. Um = 250 Vrms or Vdc, –40 °C ≤ Ta ≤ 70 °C.
Mounting
Type	DIN‑Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight
Weight	About 140 g
Connection
Connection	By polarized plug‑in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.

D5011D SIL3 2-Wire HART Transmitter Power Supply